FAQ

Octane is an evaluation of the fuel's ability to prevent pre-detonation, or combustion, before it is ignited by the spark plug.

Fuel achieves octane in various ways, whether through the latent heat of evaporation, heavy metals, or refining, all with different pros and cons.

Always understand the essential and sustainable fuel.

Yes, octane boosters, such as WOLF Octane, can offer the same performance as racing fuel, if used correctly.

Another reason that you may need to boost octane is if you do not have sufficient fuel available at the gas station.

This is very common in the Middle East and around the world.

  If you are in a warm area and have a high-performance vehicle, there is a good possibility that 91 octane is not enough to maintain optimum engine performance and efficiency.

For these cases, we recommend using Wolf.

Keeping the engine components clean is essential as it keeps them in good condition.

If the engine components are dirty, the engine oil may not lubricate or protect the engine properly.

Accumulation of dirt may also cause engine damage prematurely.

Belgian Wolf engine oils are designed to clean and protect engines for better performance.

Oil is the lifeblood of your car.

 If the wrong type of oil is used, the engine will face the risk of wear and tear.

And more corrosion

As the formation of obstruction, it may cause the engine to stop.

 By using Wolf Oil in the engine, you can continue to drive with confidence and experience the feeling that your vehicle has just gone out of service - all this for less than the cost of filling a fuel tank.

In many ways:

By cleaning the engine - Belgian Wolf oils are engineered to remove dirt, debris and sediment from the engine components and prevent clogging of important oil lanes.

As the oil helps to trap the dust and make it harmless until removing it, in the next oil change.

By reducing friction and reducing corrosion - Belgian Wolf oils create a protective layer on engine components and include special additions that work between moving surfaces to prevent contact and reduce drag, this helps your engine to operate quietly and effectively.

the best protection in their class and help to extend the life of the engine.

By preventing corrosion and rust - Belgian Wolf oils help protect engine components, by removing heat carrying heat oils away from hot areas, such as around the piston rings where the temperature may reach 320 ° C, and redistribute it around the engine.

By preventing corrosion and rust - Belgian Wolf oils help protect engine components from corrosion after oil change intervals.

Comparative studies show that the Wolf oils provide the best protection in their class and help to and extend the life of the engine.

Engine lube oils are made of three important components - base oils, viscosity modifiers and performance additives.

These materials are carefully selected and skillfully mixed to enable the oil to provide maximum protection to the engine.

You must change the oil and filter at or before the end of the oil change periods indicated by the manufacturer of your vehicle.

These depend on the traveled distance or the elapsed time.

  Regular oil change helps keep engine oil in good condition and provides the best protection for all engine components.

Used oil can pollute the environment, and should never be poured into drains.

This is illegal in many countries.

Instead of that, take the remnants to an official oil disposal place or a recycling center (these are often located at local remnants collection points).

Otherwise, ask the recycling officer where you are to guide you in this regard.

Owner's manuals include minimum oil info specifications info.

 However, you can use higher quality oil if you like.

Choosing the right engine oil for your car depends on:

Vehicle type a high-performance car needs high-performance oil like Wolf.

The life of the car there are many expectations from new technology engines: high performance coupled with fuel economy.

 Advanced oils have been developed to help to keep pace with the increased engineering demands.

For example, modern cars include gas blown recycling systems that can cause high oxidation in old type oils, and devices after sensitive exhaust gas treatment that can be poisoned due to improper oils.

Driving method.

 The modern highway driving method and intermittent driving require high quality oils to prevent engine corrosion.

Wolf spent years of technology research and analysis development in every side of the composition - from the base oil technology to choosing additives and blends.

As all of our acquired experiences in supporting leading racing teams, such as Ferrari, are directed to the Wolf formula.

 It is designed to meet challenges, so no matter how stressful your driving conditions are, Wolf Oil helps to clean and protect your engine.

Adding an uncontrolled amount of additives oil is like putting salt on a dessert.

 It takes years of experience in the blending field to reach at the correct formula of Wolf oil, and the method of mixing different additives with base oils is crucial to the overall oil performance. So, our advice is to "Don't add extras" if you want to get the best performance out of your car.

 Adding additional lubes oil may end the vehicle manufacturer's warranty.

Not regularly changing the oil can significantly reduce the level of protection provided against engine corrosion.

Engine oil acts as a reservoir for all types of byproducts that formed when fuel is burned, including soot, sludge, water, and acidic materials, as well as non-combustible and partly burned fuel.

At the same time, the tension on the oil while the engine is running gradually depletes the components that determine the performance of

the oil.

 So, using new oil on a regular basis, ensures the right balance of the components in the oil.

It also removes waste that would otherwise lead to increased sediment formation, corrosion of metallic components and increased more problems.

If you just got used to completing the oil level without changing it.

This makes more pressure on the old oil which still in the engine.

This pressure issue has gotten worse in recent years,

a lighter modern engine that are 25% less oil operates in their oil tanks.

 Wolf lube oil has a strong ability to clean engine components and continues to keep the engine clean until the next oil change.

A recent European study showed in that 75% of car trips are less than 10 km.

These trips often include a high level of stopping and moving, which can cause a significant increasing in engine corrosion if the oil is not changed regularly.

If you are driving a car for a long period of time, without obtaining enough services, then you should go today to check the tire's corners.

 This is important if you feel the vehicle is derailing.

 This can cause serious problems such as drifting while you are driving straight, while reducing the tire's life.

 The professional technician will adjust the corners of the wheel by modifying its corners.

In this way, the tires will become vertically equal to each other.

Experts believe that adjusting the corners of the wheel can maintain fuel consumption and increase the vehicle's speed.

 Experts can provide you with the full test results such as the abraded parts, and how far the car needs to adjust the corners.

These consequences may differ significantly from the results for adjusting the back-wheel corners (if this option is for you).

The side of each tire includes its own information, especially the tire size information, as it consists of a set of letters and numbers.

The maximum speed that a tire can holding out is called a speedometer.

Tire experts always recommend not to underestimate the speedometer.

 While purchasing a new tire, it is recommended to purchase a tire that matches the speedometer.

Tire surface abrasion is a relative measure, which means the tire can withstand a long time compared to other tires.

 For example, if the tire surface abrasion is equal to 400, this means that it can withstand twice the amount a tire can withstand an equal rating of 200.

 The assessment of the degree of consistency indicates the tire's ability to maintain consistency in wet methods. It is measured by levels such as AA, A, B, and C, where AA denotes the maximum power while the letter C indicates the lowest power level.

 Temperature resistance indicates the tire's ability to withstand heat in atmospheres such as those in Arab countries.

 It is measured by levels A, B and C where letter A means higher resistance and letter C means less resistance. It is always recommended to use Tiers A and B in the Arabian Gulf countries.

The tire may remain in good condition for a period of time in the warehouse before arriving at the vehicle and installing it.

 So, it is important to know the date of its manufacturing.

The date is printed on the side tire surface as four numbers.

The first two numbers indicate the week number, while the other two numbers indicate the year number.

For example, if the code is 2316, this means that the tire was manufactured in the 23rd week of 2016.

Trusty car displays the tire's manufacture date on the same website.

 According to the ESMA (European Markets and Securities Regulatory Authority), you cannot use the tire after the production date for more than 5 years.

But if your average mileage per year is from 30 to 40,000 then it is okay to purchase a two-year-old tire as it can be used before the maximum 5 years have passed.

Depending on how the tire is used, you can purchase the tire with the correct production date accordingly.

Trusty Car recommends that, it is not possible to determine the time to replace the tire through the period of use, but there are many signs that you can determine when examining the tires: checking the surface of the external tire and the abrasion rate.

In the event that the tire is exposed to cracks or to an external surface of shrinking or contracting depth, or until it appears to be worn or worn out, you should check it at the nearest service center.

The vehicle should be checked at regular time intervals.

If 3 years have passed since the tires are used, a regular inspection of the tire should be carried out on a monthly basis.

The RTA offers this examination when you are going to renew your car license. 

It depends on the weather conditions and how comfortable you are while driving. Usually, when the original company tires are installed and fixed at the manufacturing time of a vehicle, this is sufficient.

But you can try a wide variety of tires that match your tire model.

If your requirements for the tire are unique, then there is no problem to try other tires.

 If you are satisfied with the original tires of the company, it is recommended that you have a similar.

It depends on the way you drive, whether you are driving fast, or drive on bumpy roads, or quiet driving or short distances, etc.

You can write down the names of some tires that match your standards and tire model, then compare them in terms of prices, quality, abrasion factor, cracks, etc.

to reach the final type that suits you.

Please check the vehicle owner's instruction manual to get the correct pressure conditions recommended by the company, or you can review the patch under the left front car door.

reduced tire pressure (reduced tire inflation)

The temperature in Arab countries fluctuates all the time and because of this the tire surface get abraded being destroyed.

This means low tire pressure (under tire inflation). This has a major impact on the vehicle’s direction.

 Moreover, the rolling resistance / tire rotation resistance increases and as a result the fuel consumption rate increases.

 When temperatures increase, tire pressure increases by an average of up to 3-5 pounds, which reduces tire stability on the ground. This is called increased tire pressure (increased tire inflation).

If the air volume increases to more than a certain limit, the tire may also explode.

Tire symbols are located in the side of a car tire, as it is a symbol or code that indicates the type of the tire, and its specifications and uses, in terms of the size of the tire, its capabilities and its suitability for the car.

For example, you may find signs on the tires in the form of the following tire code P195 / 60R16 63H M + S As for the meaning of these symbols, it is as follows

P- shows the tire type

195- tire width (the portion of the vehicle is running) in millimeters

60 -aspect ratio of the tire side compared to the width (and the ratio is)

R -means Radial Construction and it is for the tire design itself

16- Diameter of the inner edge in inches (the diameter of the rim)

63- tire load rate

H-tire average speed rate

M and S-tire is suitable for driving in all seasons

Note:  If the symbol starts with "LT" instead of "P" this means that it is a light truck tire, but for light truck tires it is designed to have higher loading capabilities and is always present in pickup vehicle and SUV trucks.

 It does not have to have "LT" tires and in most cases the main tire specifications for these cars come like regular passenger cars.

As for knowing the age of the tire and the date of its production, we find that it always comes the date of tire making in the coding of the tire and it is like this: DOT xxxx xxx 3604, and the last number in this symbol is that indicates the date of the tire industry, so 3604 means that the tire was made in the 36th week , year 2004.

 Manufacturers recommend that all tires be replaced after 6 years at most, even if some tires can withstand 10 years.

First ... the meaning of the letters on top

J-Withstands a maximum speed of 100 km / h

K-Withstands a maximum speed of 110 km / h

L-Withstands a maximum speed of 120 km / h

M-Withstands a maximum speed of 130 km / h

N-Withstands a maximum speed of 140 km / h

P-Withstands a maximum speed of 150 km / h

Q-Withstands a maximum speed of 160 km / h

 R-Withstands a maximum speed of 170 km / h

 S-Withstands a top speed of 180 km / h

 T-Withstands a maximum speed of 190 km / h

 H-Withstands a maximum speed of 210 km / h

 VR-Withstands a maximum speed of 210 km / h

 ZR-Withstands a top speed of 240 km / h

 V-Withstands a top speed of 240 km / h.

W-Withstands a maximum speed of 270 km / h

Y is open over 270 km / h

And the meaning of the other letters

A-High temperature durability

B- Moderate heat durability

C-Very low heat durability 

No objection to increasing the battery ampere up to 20% over the original battery.

(As for more than that, it may cause over stress on the dynamo)

Provided that it is installed without vibration and installed well.

The main three purposes of a car battery are:

1. Supply the engine and ignition system with electricity so that it can start the engine.

2. Completing the charger system when the load requirements exceed the supply capacity of the alternator.

3. Act as a voltage stabilizer in the electrical system. The battery temporarily reduces or minify the high voltage that may happen in the system, thus protecting the sensitive voltage components.

1. Dismantle the fan belt.

2.If any of the windings of the motor part are damaged.

3. In the event of a dual link combustion and an open circuit.

4. In the event that the dual-link is damaged, allow the passage of electrical current, and then cause unexpected actions for different sensors and processors.

The electric current waves are harmful to the battery.

This is done when the charging indicator is damaged.

When overcharging the battery and damaging the multiple car's electrical components.

Fill each cell until it reaches the highest level, as the battery is of sulfuric acid type

To improve the activation process, let the battery stand 20 minutes after filling.

Keep the battery surface clean and dry.

Protect edges with oil / Vaseline to prevent corrosion.

Periodically check the level of the electrostatic precipitated plate and the acidity of the distilled water in order to restore the upper level.

Ensure that the cable clips are installed tightly.

Before filling the battery, check the vehicle electrical system.

Check the charging system periodically and ensure the battery is properly charged.

Do not remove or loosen the sealing tape on the vent cap until the battery is prepared for acid filling.

Do not fill the acid above the upper level.

When attempting to fix the cable clips, tightening to ends is prohibited.

Be sure that no acid is added to restore the top level.

Keep away explosive materials / gases from the battery.

You can increase the life of the batteries by

Choosing the suitable battery for your use.

Perfect charging

Do not shake it.

Over-charging

Reduce charging

Dirty and Corroded out edges

Vibration

Excessive clamping of clips

Incorrect battery setting.

For manufactured cars before 1992, only lead-based fuel with a percentage of octane 92 should be used, while cars produced since 1992 can be operated with both lead and unleaded fuel with an octane degree of not less than 95, and drivers are advised to use lead-free fuel Whenever possible, it is better for the environment .

There are several factors that impact fuel consumption, and by identifying them, drivers can save fuel and money

Driving habits

Such as fast engine acceleration, high-speed driving, a sharp turn, and the use of brakes dramatically, all of which increases fuel consumption.

Drivers can simply reduce fuel consumption by driving within the speed limits on the roads, and driving quietly and smoothly.

Keep the engine running

This is when the car is stopped, whether in congested traffic or in parking situations and when waiting while the engine is running.

We recommend turning the engine off when it is safe, such as standing in parking or waiting for passengers

Carload

A heavyweight car consumes more fuel, and therefore drivers can improve the fuel economy by removing any unnecessary materials or items from the luggage compartment.

Engine status

If the engine is not properly cared, it will not function properly. by regular periodic maintenance by qualified technicians

Traffic status

Frequent stopping and driving in congested traffic keep the transmission in low speed gear, which is an ineffective way to drive, and this can be avoided by choosing the non-congested roads, which helps to save fuel.

The tires are not inflatable well as it should

When the tire pressure is low, this increases its friction and resistance on the road surface, which increases the burden on the engine.

Correct tire pressure not only improves fuel consumption, but also extends tire life.

When the engine is off, the "fridge" evaporator (the device through which the coolant passes through to cool the air) passes a condensation, damaging the piece and causing leakage.

To increase the life of the evaporator, drivers must turn off the air condition about five minutes before reaching the intended destination, which raises the evaporator temperature and thus prevents condensation, and reduces chances of corrosion.

Another simple way, drivers can take care of the air conditioning system is to regularly check the cooler grille to make sure there are no tree leaves, insects, or any other dirt and obstacles blocking the grille. These planktons reduce airflow across the network and reduce cooling efficiency.

The net can be gently washed with a water hose to remove this dirt without causing any damage.

During the winter season (when the air conditioner is used less), we recommend operating the air conditioning system for at least ten minutes a week when driving at a constant speed.

 This method causes the lubricating oil to circulate in the cooling system, which is necessary to keep the refrigeration unit running smoothly.

If the air conditioning system is not working efficiently, we recommend that you immediately take the car to a service center for inspection.

 If the cause is a refrigerant gas leak, that means the compressor oil is also lost and both liquids must be refilled.

 The leak must be fixed before the system is fully populated, and this should only be done by a trained and highly qualified technician.

The movement of the engine valves plays a major role in the vehicle's efficiency.

Valve space indicates the distance between the valve stem and the swing arm, as components expand when the engine warms. As the parts wear, the space distance changes, which reduces strength and adversely affects work efficiency.

Therefore, space control improves fuel economy, and this operation must be done every two years or every 40,000 km.